Skip to content
1-888-777-2966info@monoglass.com
MonoglassMonoglass
Monoglass
Monoglass Spray Applied Insulations

Spray Applied Thermal & Acoustic Insulation Products
Insulating your world since 1979

  • Home
  • Products
    • Monoglass Spray-On Insulation
    • Sonoglass Acoustic Treatment
    • Insulseal Protective Coating
    • Color Spray Tints
    • Monoglass Spray Nozzle
  • Projects
    • Project Spotlight
    • International Projects
    • North American Projects
  • Information
    • Environment and LEED
    • Safety Data Sheets
    • Sound Rating Guides
    • Test Data and Specs
    • Continuing Education Credits
  • Product News
  • Information for Applicators
  • Contact Us
    • Contact Us
    • Opportunities
  • Home
  • Products
    • Monoglass Spray-On Insulation
    • Sonoglass Acoustic Treatment
    • Insulseal Protective Coating
    • Color Spray Tints
    • Monoglass Spray Nozzle
  • Projects
    • Project Spotlight
    • International Projects
    • North American Projects
  • Information
    • Environment and LEED
    • Safety Data Sheets
    • Sound Rating Guides
    • Test Data and Specs
    • Continuing Education Credits
  • Product News
  • Information for Applicators
  • Contact Us
    • Contact Us
    • Opportunities

Insulseal Protective Coating

Insulseal is intended for use as a protective coating over Monoglass Spray-On Insulation or Sonoglass Acoustic Treatment in residential and commercial construction.

 

Insulseal helps prevent damage to sprayed insulation from personnel, machinery, birds and other sources. Insulseal provides a tough, flexible coating which encapsulates surface fibers and resists abrasion. It is spray applied using airless spray equipment and it can be used over wall or ceiling applications.

ColorChips2

Appearance:

Insulseal is available in white, black and gray, and can be tinted to various colors or painted with latex paint following curing.

Composition & Materials:

Insulseal is a water soluble liquid copoly emulsion. It is non hazardous and is not regulated as a health or environmental hazard. It cleans up with soap and water while wet. The standard color is white for high light reflectance, but is also available in black and gray.

  • Tested to ASTM E-84;
  • Flame Spread Rating= 0  Smoke Development Rating = 0

Application:

Insulseal is to be applied using airless spray equipment. For recommended equipment refer to Insulseal Application Guide. Insulseal is applied to Monoglass or Sonoglass insulation that has been board tamped flat and over-sprayed with standard adhesive for a smoother application. Insulseal can be applied in varying coverage levels to achieve the amount of protection and surface coverage required. The spray application allows it to be spray applied to virtually any surface configuration to ensure complete coverage.

Limitations:

  • Insulseal is not to be applied at a coverage rate lower than 30 square feet per gallon.
  • Insulseal is to be applied as delivered: do not dilute.
  • The product should be applied to tamped insulation for a smoother finish.
  • Insulseal must not be applied until after insulation material is completely cured and dry through to substrate.
  • Insulseal must be kept from freezing. Insulseal cannot be applied when ambient and substrate temperatures are below 1°C / 34°F during the application and until the product is completely dry. Adequate dry heat and ventilation must be supplied at low temperatures. Keep container closed when not in use. Should separation occur after extended storage, stir until evenly mixed prior to use.

Installation:
Insulseal shall be installed in accordance with manufacturer’s written instructions. Contact Monoglass Inc. for further details.

Availability & Cost:
Insulseal is available throughout the United States, Canada, and many countries worldwide. Contact Monoglass Inc. for the names of contractors and Monoglass Agents in your area.

Technical Assistance:
Please contact Monoglass Inc. or your Monoglass Agent for technical assistance, complete product literature and material safety data sheets on this product.

Insulseal Coating in Grey
Insulseal grey
Insulseal Protective Coating in Grey
Insulseal Protective Coating in Grey

Click for more information

on INSULSEAL Protective Coating for Thermal & Acoustic Insulations

Share this page
Monoglass Products Video
https://monoglass.com/wp-content/uploads/2017/11/Promo-Video1.mp4
Monoglass Newsletter
Sign-up form

Please enter your email address to subscribe:

Recent Posts & News
  • MasterSpec : New On-Line Listings for Monoglass and Sonoglass products
    February 5, 2019
  • cold weather monoglass
    Cold Weather Warnings & Tips
    November 29, 2018
  • The Fall Rush is here, along with colder temperatures.
    November 2, 2018
wordpress visitor
Contact Us
Monoglass Incorporated
1200 West 73rd Avenue, #922
Vancouver, B.C. Canada
V6P 6G5
Telephone: (604) 261-7712
Toll-Free in North America:
1-888-777-2966
1-888-SPRAY-ON
Fax: (604) 261-1342
E-mail: info@monoglass.com
Email Us

Submitclear

Recent Posts & News
  • MasterSpec : New On-Line Listings for Monoglass and Sonoglass products
    February 5, 2019
  • cold weather monoglass
    Cold Weather Warnings & Tips
    November 29, 2018
  • The Fall Rush is here, along with colder temperatures.
    November 2, 2018
  • New Applicator Manuals
    February 27, 2018
Monoglass Upcoming Events
<
< 2018 >
September 03 - September 09
>
Week
Month
List
Week
Day
  • 03
    No events
  • 04
    No events
  • 05
    No events
  • 06
    No events
  • 07
    No events
  • 08
    No events
  • 09
    No events
Monoglass
Copyright Monoglass Incorporated 2019. All rights reserved. Monoglass and Sonoglass are registered trademarks of Monoglass Incorporated.
  • Contact Us
bottom